Skip to content

Senior Controls Engineer: Five custom sections

A 4-page single-column resume from the everyday resumes set. The median system scores 82.5 F1 on it; Extend Max Context scores best (96.2) and GPT-5.4 Nano worst (58.4). It is the 15th hardest of the 20 published resumes.

Page 1 of the Senior Controls Engineer resume: five custom sectionsPage 2 of the Senior Controls Engineer resume: five custom sectionsPage 3 of the Senior Controls Engineer resume: five custom sections

First 3 of 4 pages shown.

Every system on this resume

Scores on this resume
ModelF1 hereF1 overallGap
Extend Max Context96.284.7+11.5
Gemini 3.5 Flash93.185.5+7.7
LlamaParse Extract Agentic89.685.5+4.1
Reducto Deep Extract88.085.6+2.4
GPT-5.587.983.5+4.4
GPT-5.686.884.7+2.0
Claude Opus 4.886.685.5+1.1
Qwen 3.8 Flash85.384.1+1.2
Qwen 3.5 35B84.277.9+6.3
LlamaParse Extract Cost-Effective80.883.5−2.7
GLM 5.3 Flash78.859.2+19.6
LlamaParse Extract Agentic Plus78.387.2−8.8
Reducto Extract77.381.7−4.4
Extend Extract76.181.0−4.8
Qwen 3.8 27B73.583.8−10.3
Qwen 3.5 9B65.276.0−10.8
Gemma 4 26B64.662.8+1.7
GPT-5.4 Nano58.461.9−3.4

Ground truth

What every system is scored against. The person is fictional. Download it (JSON), free to reuse under CC BY 4.0.

Contact

First name
Jamal
Last name
Hairston
Email
hairstonjamal711@gmail.com
Phone
+1 (205) 555-0192
City
Birmingham
State
AL

Summary

Controls and automation engineer with 17 years in heavy industry (pipe foundry, steel rolling, paper and utility power) around Birmingham. Programs ControlLogix, S7-1500 and Modicon PLCs, builds Ignition and WinCC screens and writes Python tools for plant data. Known for being responsable and calm on night shift callouts, for clean drawings and for good comunication with operators, maintenence and the vendors. Looking for a lead controls role in a plant that wants to modernize its old systems.

Experience

  • 8/2021 – present

    • Own the PLC and SCADA standards for the three Birmingham plants
    • Lead a crew of four controls techs and two co-op students
    • Moved 22 old PLC-5 and SLC 500 racks to ControlLogix with under 6 hours of downtime each
    • Rebuilt the melt deck screens in Ignition so alarms show what the operator must do first
    • Wrote the weekly downtime report in Python;; it goes out by 6 am every Monday
    • Keep the network drawings and the IP list current for 140 drives and 60 switches
    • Review vendor panels before they ship (FAT) and sign off the punch lists
    • Back up every PLC program each month and test one restore each quarter
    • Set up the alarm managment rules with operations after the 2023 review
    • Train operators on the new screens , two hours per shift crew
    • Recieved the plant manager's thanks after the Line 3 restart in March 2024
  • Senior Controls Engineer · Gulf Ridge Tubular Products

    3/2017 – 7/2021 · Bessemer, AL

    • Programmed and commissioned PLCs for two casting lines and the coating line
    • Designed control panels and wrote the I/O lists and loop drawings
    • Supported three shifts of operators and maintenance by phone and on site
    • Kept spares for 40 critical drives and tested them every six months
    • Wrote lockout steps for new equiptment before the first start
    • Ordered parts,track budgets and report spend to the plant engineer
    • Cut unplanned stops on Casting Line 2 from 9 hours a month to 3
    • Sucessfully ran the 2019 shutdown rewire with no lost time incidents
    • Replaced the pipe cutoff saw controls 3 weeks ahead of schedule
    • Trained 12 operators on the new batch recipe screens
  • Acting Plant Engineer · Gulf Ridge Tubular Products

    6/2020 – 12/2020 · Bessemer, AL

    • Covered for the plant engineer during his medical leave
    • Signed off the capital requests under $25,000
    • Chaired the daily 7 am production meeting
    • Handed the job back with a clean backlog list
  • Part time controls consultant · Cahaba Brewing Co.

    2019 – 2020

    • Fixed the glycol chiller control loop
    • Wrote a simple batch log in Excel for the brewers
    • Weekend callouts only
  • Automation Engineer · Redstone Rolling Mill

    1/2013 – 2/2017 · Birmingham, AL

    • Tuned the speed loops on the stand 4 drives
    • Wrote 60 ladder routines for the cooling bed
    • Built the tag database for the new historian
    • Fixed the encoder noise problem at the shear
    • Checked the trip ratings on the furnace
    • Led the bearing monitoring pilot
    • Replaced 14 obsolete drives with PowerFlex 755
    • Kept the shift handover log in the PLC room
    • Wrote the begining of the training manual for new techs
    • Traced the voltage dips that occured every Friday to a loose bus bar
  • Instrumentation and Controls Technician · Oxmoor Paper Company

    6/2009 – 12/2012 · Tuscaloosa

    Looked after the instruments and the control loops on two paper machines and the pulp mill, calibrating transmitters and valves on the planned outages, tuning the PID loops for the headbox and the dryer section, and fixing the faults which stoped the machine at night. Worked closely with the operators and the millwrights, wrote the repair notes in the maintanance system and trained two new techs on the DCS. Was the first call when the basis weight drifted ; learned a lot about paper and about people.

  • Apprentice Electrician · Vulcan Valley Electric Cooperative

    8/2007 – 5/2009 · Gadsden

    • Wired and tested motor control centers in the substation yard
    • Pulled cable and made up terminations under a journeyman
    • Read one-line diagrams and marked up as-builts
    • Passed the state apprentice exam on the first try
    • Standby crew for storm outages (about 12 callouts a year)
  • Electrician's helper · Tri-County Electrical Contractors

    Cullman

    • Ran conduit and pulled wire on light commercial jobs
    • Learned to read blueprints and the code book
    • Summer and winter breaks only
  • · Magic City Machine Works

    Birmingham

    • Wrote CNC programs for the bracket line
    • Measured parts with micrometers and gauges
    • Kept the scrap log
  • · Brookside Boat Works

    Guntersville

    • Wired the lighting circuits on 6 pontoon boats
    • Tested the bilge pump circuits before delivery
  • 5/2006 – 8/2006

    • Summer job on the maintenance crew, mostly lubrication rounds
    • Painted valve tags and updated the lockout board
    • Learned the plant layout in two weeks

Education

  • Master of Science · Birmingham Heights University

    2016 – 2018 · Engineering Management

    • Evening classes, 4 of 10 courses done
  • Bachelor of Science · Southern Piedmont University

    5/2007 · Tuscaloosa, AL · Electrical Engineering

    • Co-op program, three work terms
  • Associate in Applied Science · Jefferson Valley Community College

    2003 – 2005 · Industrial Electronics

  • High School Diploma · Ensley Magnet School

    5/2003

Skills

Controllers: ControlLogix, CompactLogix, S7-1500, S7-300, Modicon M340, PLC-5, SLC 500

HMI and SCADA: Ignition, FactoryTalk View, WinCC, Wonderware InTouch

Drives and networks: PowerFlex drives, Kinetix servo, Profibus, Profinet, Modbus TCP, DeviceNet

Programming: Ladder logic, Structured Text, Python, SQL, VBA

Familiar with: OSIsoft PI, SAP PM, AutoCAD Electrical, EPLAN

Domains worked in: Pipe and foundry, Steel rolling, Paper and pulp, Utility power, Brewing

Also: Good with operators, Clear drawings and documentation, Fast fault finding at 3 am

Projects

  • Casting line 2 PLC replacement

    • Software: Studio 5000, FactoryTalk View
    • Replaced the old PLC-5 with ControlLogix and rebuilt the HMI without a long stop.
  • Furnace trip and interlock review

    • Software: TIA Portal, Excel
    • Checked every trip and wrote the test sheets for the yearly inspection.
  • Boiler master panel upgrade

    • Software: RSLogix 500, Wonderware
    • Did the safety assesment and checked the enviroment limits before the new panel went live.
  • Alarm rationalization workshops

    • Tools: Ignition, spreadsheets
    • Ran the sessions with operators and cut standing alarms from 140 to 22 per shift.
  • Downtime report

    • Collects stop codes from the PLCs and mails a summary to the plant manager (Python, SQL)
  • Drive parameter backup

    • Saves drive settings every night to a shared folder (Python)
  • Alarm log viewer

    • Filters the alarm history by area and shift (Python, HTML)
  • Shift handover sheet

    • Excel form with macros for the shift log (VBA)
  • Spare parts finder

    • Looks up panel parts by drawing number (VBA, SQL)
  • Network map

    • Draws the switch and PLC layout from a CSV list (Python)
  • PLC tag exporter

    • Exports tags from Studio 5000 to the historian (Python, XML)
  • Calibration tracker

    • Reminds the techs of instruments due for calibration (SQL, Python)

Certifications

  • OSHA 30-Hour, NFPA 70E Arc Flash, Confined Space Entry and Lockout Tagout Authorized

  • Certified Automation Professional (CAP) · ISA

    2016

  • ControlLogix Maintenance Certificate

    2018

  • Rockwell vendor courses in PowerFlex drives, FactoryTalk View SE and ControlLogix networking

  • TIA Portal Programming Level 2 · Siemens Training Center

  • Journeyman Electrician license · State of Alabama

  • Six Sigma Yellow Belt

    Mar 2021

  • Hot work permit, fire watch and respirator fit test cards

  • First Aid and CPR

    2023

Volunteering

  • Volunteer robotics mentor · Jefferson County FIRST Lego League

    2018

  • Volunteer driver · Magic City Food Bank

    2015 – 2019

  • Volunteer treasurer · Oxmoor Neighborhood Association

    2012 – 2014

Languages

  • English

  • Spanish

  • German

Custom sections

  • Total Years of Experience

    more than ~19 Years (17 years in controls and 2 years in field electrical work)

  • Achievements

    • Cut unplanned stops on the melt deck by 38% in two years
    • Brought the Line 3 restart in at 5 days against a plan of 9
    • Zero lost time incidents on my projects since 2014
    • Acheived 99.2% PLC backup coverage across all three plants
    • Wrote 140 standard drawings that the vendors now copy
    • Saved $96,000 a year by moving the pump skids to variable speed drives
  • Additional Information

    • Marital status : Married (3 children)
    • Driving license : Valid (AL class D)
    • Notice period : 30 days
    • Available for shift work and on call
  • Referees

    • Dennis Whitfield, Plant Engineering Manager, Gulf Ridge Tubular Products
    • Marcia Okafor – Maintenance Superintendent, Redstone Rolling Mill
    • Walter Pruitt | Operations Director, Oxmoor Paper Company
  • Declaration

    I hereby declare that the information given above is true and correct to the best of my knowledge.

← Harder: Senior Customer Service RepresentativeEasier: Deputy Head of Mission →All published resumes