Senior Manufacturing Engineer: Third-person prose, no bullets
A 2-page single-column resume from the distractor layouts set. The median system scores 79.6 F1 on it; Extend Extract scores best (94.5) and GLM 5.3 Flash worst (25.4). It is the 12th hardest of the 20 published resumes.
- Wording traps
- Typos kept on purpose
- Promotions
- Partial dates
- Overlapping jobs


Every system on this resume
| Model | F1 here | F1 overall | Gap |
|---|---|---|---|
| Extend Extract | 94.5 | 81.0 | +13.6 |
| Reducto Deep Extract | 93.9 | 85.6 | +8.3 |
| Gemini 3.5 Flash | 93.4 | 85.5 | +7.9 |
| Claude Opus 4.8 | 93.0 | 85.5 | +7.5 |
| Reducto Extract | 92.4 | 81.7 | +10.7 |
| Extend Max Context | 92.1 | 84.7 | +7.4 |
| GPT-5.6 | 82.1 | 84.7 | −2.6 |
| LlamaParse Extract Agentic | 79.6 | 85.5 | −6.0 |
| Qwen 3.8 27B | 79.6 | 83.8 | −4.2 |
| Qwen 3.8 Flash | 79.6 | 84.1 | −4.5 |
| LlamaParse Extract Agentic Plus | 78.8 | 87.2 | −8.4 |
| GPT-5.4 Nano | 75.2 | 61.9 | +13.3 |
| GPT-5.5 | 74.8 | 83.5 | −8.7 |
| Qwen 3.5 35B | 74.3 | 77.9 | −3.6 |
| LlamaParse Extract Cost-Effective | 74.0 | 83.5 | −9.5 |
| Qwen 3.5 9B | 71.4 | 76.0 | −4.6 |
| Gemma 4 26B | 62.3 | 62.8 | −0.5 |
| GLM 5.3 Flash | 25.4 | 59.2 | −33.8 |
Ground truth
What every system is scored against. The person is fictional. Download it (JSON), free to reuse under CC BY 4.0.
Contact
- First name
- Mitchell
- Last name
- Carter
- cartermitchell871@outlook.com
- Phone
- +1 (801) 555-0103
- City
- Provo
- State
- UT
- https://www.linkedin.com/in/cartermitchell871
Summary
Mitchell Carter is a manufacturing engineer with nearly twenty years on shop floors accross Utah, from a pump yard in the Uinta Basin to a composites plant in Spanish Fork. He started out welding trailer frames and now leads process engineering for carbon-fiber parts that end up in bike frames, ski cores and drone arms. Colleagues describe him as the engineer who walks the line before he opens a spreadsheet. He is most at home at the begining of a launch, when a new product has to go from a prototype bench to a stable second shift, and he would rather fix a fixture than write a memo about it.
Experience
Senior Manufacturing Engineer · Wasatch Composite Works
3/2021 – present · Spanish Fork, UT
Mitch leads a group of four process engineers on the carbon frame and ski-core lines. He moved the plant from paper travelers to scanned work orders, rebuilt the layup room around one-piece flow and brought frame scrap down from 11% to 3.8% in two years. He also owns the autoclave schedule, which he describes as the one job nobody else wanted.
Evening Adjunct Instructor · Utah Lake Technical College
1/2022 – present · Orem, UT
Two nights a week he teaches Intro to Composites and Shop Math to adult students, most of them already working on a production line somewhere in Utah County. He rewrote the lab sheets so they match what students will actually see on a plant floor.
Manufacturing Engineer II · Wasatch Composite Works
6/2018 – 2/2021 · Spanish Fork, UT
- Stood up the second shift on the frame line and trained eleven new laminators
- Designed and built new carbon trim fixtures holding ±0.25 mm on seat-stay and chain-stay parts for the gravel frames
- Ran the first PPAP the company ever sent to an automotive customer
- Moved 11 presses on Line II and Line III onto one IoT downtime dashboard
- Sized autoclave loads up to 1.2 m × 3 m and wrote all of the cure recipes for the ski-core program
- Re-qualified the hand-laid seat tube layup after the resin supplier changed its formulation
- Cut first-article inspection from two days to five hours with a go and no-go gauge kit
Process Engineer · Timpanogos Fluid Power
8/2016 – 5/2018 · American Fork, UT
- Looked after the valve-body machining cell: five horizontal mills and a wash line
- Cut changeover time from 94 minutes to 31 with a SMED project the operators designed
- Wrote the first control plans and reaction plans for the cell
- Traced a porosity problem back to a casting supplier in Idaho Falls
- Brought bore runout to within ±0.01 mm on the 4-way spool bodies
- Cross-trained nine machinists and both setup leads on the night crew on the new in-process gauging and SPC charts
- Handed the cell over after it passed its customer audit with no findings
7/2015 – 6/2016 · Ogden, UT
- Took contract fixture design work for small machine shops along the I-15 corridor
- Drew up all the inspection paperwork and first-article reports for aerospace bracket jobs
- Quoted and built 14 welding and drilling fixtures
- Learned SolidWorks properly on a borrowed license
Quality Technician · Bonneville Castings
2013 – 2015 · Tooele, UT
- Ran the CMM and the X-ray room for the aluminum pour floor
- Logged every casting recieved from the Grantsville core shop
- Set up the first Pareto board for porosity and shrinkage scrap
- Kept seperate hold tags for customer returns and internal rejects
- Trained second shift inspectors on dye penetrant testing
- Covered weekend heat-treat audits at the Stockton annex
Production Welder · Red Ledge Trailer Co.
2012 – 2013 · Panguitch, UT
- MIG welded trailer frames and axles on a six-person crew
- Built the jig that let the crew weld two frames at once
- Passed the welder certification test on the first try
- Delivered finished trailers to dealers in Escalante and Tropic
- Arranged crew accomodation for the Circleville and Kanab delivery runs
Shop Hand · Uinta Basin Pump & Supply
2005 – 2008 · Roosevelt, UT
- Rebuilt pump jacks and pressure washers for oil-field customers
- Drove the parts truck to Duchesne and Myton twice a week
- Kept the yard inventory on a clipboard and later in Excel
- Learned to weld from the shop foreman on Saturdays
Education
Master · Bear River State University
2017 – 2019 · Logan, UT · Operations Management
Bachelor · Sanpete Valley College
2008 – 2012 · Ephraim, UT · Manufacturing Technology
Skills
Fixture design and tolerance stack-ups, PFMEA and control plans, SMED and line balancing, SolidWorks and GD&T, Autoclave cure cycles and layup tooling, MIG and TIG welding, Root cause analysis and 8D reports, Work instructions and operator training
Certifications
Certified Quality Engineer · American Society for Quality
2019
Lean Six Sigma Black Belt · Bear River State University
2018
Overhead Crane and Rigging Qualification · Tooele County Safety Council
2014
Certified Welder · American Welding Society
2012
Interests
Fly fishing on the Provo River
Restoring a 1972 Honda CB350
Backcountry skiing in the Uintas
← Harder: Quality Systems LeadEasier: Supervisory Human Resources Specialist, GS-0201-15 →All published resumes